Tango ULTIMATE

Our TangoULTIMATE

To build a great sounding and technically perfect Phono Preamp is one of the biggest challenges in HiFi-but easy for you – TangoULTIMATE.

You need - exact equalization of the input signal - which can only be achieved by using high-precision components in the equalizer of the Phono amplifier. Therefore, we measure each single part with high-precision measuring instruments. The values ​​of the components used are hand selected here on a deviation of less than 1%!

For the two stereo channels also always identical pairs are to ensure perfect equal channels. All this efforts are done to get an almost entirely linear output voltage from the Tango ULTIMATE. We use a passive EQ network followed by an active network which gives the best results.

Additionally - high, adjustable gain - The Signal delivered by the cartridge is very very low. The needed amplification also amplifies the noise and hum which is naturally involved in any electronic device.

We are using specially designed devices which have incredible low noise and accuracy so the result is a very high gain amplifier with very low noise.

All those carefully chosen devices are placed on the printed circuit board by using the latest CAD technology and star shaped mass technology. A power supply circuit supplies the sensitive amplifier circuit with filtered direct current.

Our output is an extremely fast Single ended Class-A Mosfet output stage with very low output impedance to drive any cable on the market to make sure the signal is transported to your amp no matter which cable you use in highest perfection.

All this is put into a rock solid housing milled out of a block Aluminum. This nonmagnetic housing is part of the shielding and ensures perfect sound quality.

Technical data

Weight

3kg

Gain

41dB forMM, 57dB for MC, and 69dB for MC-low selectable by the front knob.

Dimension

BxWxH 190x165x50mm